Temperature influence in flow and volume measurement
In mechanical ventilators, the inspiratory and expiratory volumes (Vti, Vte) and minute volumes (Vi and Ve) must be precisely checked using gas flow analyzers or
Menu
Category: Multi-Gas Measurement
Introduction
In biomedical terms, multi-gas measurement refers to the process of measuring and analyzing the concentrations of multiple gases in a sample at the same time. This can be done using specialized analytical instruments such as mass spectrometers, gas chromatographs, and Fouriertransform infrared spectroscopy (FTIR) instruments. Multi-gas measurement is a powerful tool that can provide a wealth of information about the patient’s condition, enabling to optimize diagnosis and treatment.
Get The Latest Updates
Subscribe to our newsletter
No spam, notifications only about new products, updates.
Ensuring Safety and Efficiency: Ventilator and Anesthesia Gas Testing Guidelines by OSHA FDA Anaesthesia Apparatus Checkout Recommendations (1993)
Introduction: In 1993, the Occupational Safety and Health Administration (OSHA) and the Food and Drug Administration (FDA) collaborated to develop the Anaesthesia Apparatus Checkout Recommendations.
Anesthetic Agent Device – Vaporizers
In order for volatile anesthetic agents, which are administered through inhalation and can easily change from liquid to gaseous state, to be used in anesthesia
Biomedical Testing & Measurement in Ventilator Devices
Abbreviations: TITCK: Turkish Medicines and Medical Devices Agency ISO: International Organization for Standardization IEC: International Electrotechnical Commission ECRI: Emergency Care Research Institute The
Flow Measurement using Pneumotachograph Principle
A pneumotachograph flow sensor converts the flow of gases through it into a proportional signal of pressure difference on either side of a central mesh
Adaptive Leak-Flow Compensation for Volume Measurement in Gas Flow Analyzers
As described here, manual adjustment of a baseflow might be a cumbersome process. It requires multiple steps which must be repeated every time if the
Test of COVID Ventilators
COVID-19 is causing respiratory problems for a multitude of patients and is directly affecting hospitals, especially Intensive Care Units (ICU), where in many cases there
ISO 17025 accredited calibration laboratory
With comparative measurements and a management system in accordance with the SN EN ISO/IEC 17025 standard assessed on a regular basis by EURAMET, METAS provides
Most Popular Posts
Temperature influence in flow and volume measurement
In mechanical ventilators, the inspiratory and expiratory volumes (Vti, Vte) and minute volumes (Vi and Ve) must be precisely checked using gas flow analyzers or
Revolutionize Your Medical Device Testing and Calibration with IMT Analytics’ FlowLab software with test sequence
Test Sequences are not just a tool; they are your gateway to unparalleled control and customization. Imagine tailoring testing or calibration procedures to meet the
Testing Blowers for Ventilators: Assessing Flow vs. Pressure Characteristics with Flow Meters
Introduction: Blowers play a crucial role in the functionality and performance of ventilators, delivering the necessary airflow for respiratory support. Ensuring the optimal operation of
Ensuring Safety and Efficiency: Ventilator and Anesthesia Gas Testing Guidelines by OSHA FDA Anaesthesia Apparatus Checkout Recommendations (1993)
Introduction: In 1993, the Occupational Safety and Health Administration (OSHA) and the Food and Drug Administration (FDA) collaborated to develop the Anaesthesia Apparatus Checkout Recommendations.
